User Guide

9-7
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
78-14099-04
Chapter 9 Configuring VLANs
VLAN Default Configuration
Translational bridge 2 0 0–1005
VLAN state active active, suspend
Table 9-4 Token Ring (TrCRF) VLAN Defaults and Ranges
Parameter Default Range
VLAN ID 1003 1–1005
VLAN name “token-ring-default” —
802.10 SAID 101003 1–4294967294
Ring Number 0 1–4095
MTU size VTPv1 default 1500
VTPv2 default 4472
1500–18190
Translational bridge 1 0 0–1005
Translational bridge 2 0 0–1005
VLAN state active active, suspend
Bridge mode srb srb, srt
ARE max hops 7 0–13
STE max hops 7 0–13
Backup CRF disabled disable; enable
Table 9-5 FDDI-Net VLAN Defaults and Ranges
Parameter Default Range
VLAN ID 1004 1–1005
VLAN name “fddinet-default” —
802.10 SAID 101004 1–4294967294
MTU size 1500 1500–18190
Bridge number 1 0–15
STP type ieee auto, ibm, ieee
VLAN state active active, suspend
Table 9-6 Token Ring (TrBRF) VLAN Defaults and Ranges
Parameter Default Range
VLAN ID 1005 1–1005
VLAN name “trnet-default” —
802.10 SAID 101005 1–4294967294
Table 9-3 FDDI VLAN Defaults and Ranges (continued)
Parameter Default Range