User Guide

Contents
18
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
78-14099-04
CHAPTER 36 Configuring SNMP IfIndex Persistence 1
Understanding SNMP IfIndex Persistence 1
Configuring SNMP IfIndex Persistence 1
Enabling and Disabling SNMP IfIndex Persistence Globally 2
Enabling and Disabling SNMP IfIndex Persistence on Specific Interfaces 2
Configuration Examples 3
CHAPTER 37 Configuring the Switch Fabric Module 1
Understanding How the Switch Fabric Module Works 1
Switch Fabric Module Overview 1
Switch Fabric Module Slots 2
Switch Fabric Redundancy 2
Forwarding Decisions for Layer 3-Switched Traffic 2
Switching Modes 2
Configuring the Switch Fabric Module 3
Configuring the Switching Mode 3
Configuring Fabric-Required Mode 4
Configuring an LCD Message 5
Monitoring the Switch Fabric Module 5
Displaying the Module Information 5
Displaying the Switch Fabric Module Redundancy Status 6
Displaying Fabric Channel Switching Modes 6
Displaying the Fabric Status 7
Displaying the Fabric Utilization 7
Displaying Fabric Errors 7
CHAPTER 38 Power Management and Environmental Monitoring 1
Understanding How Power Management Works 1
Enabling or Disabling Power Redundancy 2
Using the CLI to Power Modules Off and On 3
Using the CLI to View System Power Status 3
Using the CLI to Power Cycle Modules 4
Determining System Power Requirements 4
Understanding How Environmental Monitoring Works 4
Using CLI Commands to Monitor System Environmental Status 4
Understanding LED Environmental Indications 4