User Guide

Index
IN-12
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
78-14099-04
initializing authentication of a client 11
manual reauthentication of a client 11
quiet period 11
RADIUS server 10
RADIUS server parameters on the switch 8
switch-to-authentication-server retransmission
time
13
switch-to-client EAP-request frame retransmission
time
13
switch-to-client frame-retransmission number 14
switch-to-client retransmission time 12
default configuration 5
described 1
device roles 2
displaying statistics 15
EAPOL-start frame 3
EAP-request/identity frame 3
EAP-response/identity frame 3
enabling
802.1X authentication 7, 8
periodic reauthentication 10
encapsulation 2
initiation and message exchange 3
method lists 7
ports
authorization state and dot1x port-control
command
4
authorized and unauthorized 4
resetting to default values 15
switch
as proxy 2
RADIUS client 2
topologies, supported 4
port-based QoS features
see QoS
port-channel
see EtherChannel
port-channel load-balance
command 10, 11
command example 10, 11
port cost, STP 29
port debounce timer
disabling 15
displaying 15
enabling 15
PortFast
See STP PortFast
PortFast BPDU filtering
See STP PortFast BPDU filtering
port negotiation 8
port priority, STP 27
ports
secure 1
setting the debounce timer 15
port security
aging 4
configuring 3
default configuration 2
described 1
displaying 6
violations 2
with other features 2
power management
enabling/disabling redundancy 2
overview 1
powering modules up or down 3
system power requirements, nine-slot chassis 4
primary VLANs 2
priority
overriding CoS 7, 8
private VLANs 1
community VLANs 2
configuration guidelines 2
configuring 5
host ports 8
pomiscuous ports 9
routing secondary VLAN ingress traffic 7
secondary VLANs with primary VLANs 6
VLANs as private 5