User's Manual

29/OCT/2014 REVIEW DRAFT — CISCO CONFIDENTIAL
1-14
Cisco IR500 Series WPAN Gateway and Range Extender Installation and Configuration Guide
Chapter 1 Overview
LEDs
RSSI LED
The RSSI LED shows the WPAN received signal strength at the WPAN interface. Table 1-6 lists the
RSSI LED colors and their meanings.
Ta b le 1-6 RSSI LED Status Description
Color Description
Yellow Green
Blinking Off Link state to IEEE 802.1x Relay: RSSI below threshold.
Off Blinking Link state to IEEE 802.1x Relay: RSSI above threshold.
On Off RSSI below threshold and/or link ETX above threshold.
Off On RSSI above threshold and link ETX below threshold.
RS232-DCE LED
The RS232-DCE LED shows the status of the RS232 serial communication on the port. Table 1-7 lists
the RS232-DCE LED colors and their meanings.
Ta b le 1-7 RS232-DCE LED Status Description
Color Description
Off RS232 is not selected as the serial communication standard—RS485 is
selected, or
the port is turned off completely.
Green RS232 is selected as the serial commun
ication standa
rd and the port is
active.
RS485 LED
The RS485 LED shows the status of the RS485 serial communication on the port. Table 1-7 lists the
RS485 LED colors and their meanings.
Ta b le 1-8 RS485 LED Status Description
Color Description
Off RS485 is not selected as the serial communication standard—RS232 is
selected, or
the port is turned off completely.
Green RS485 is selected as the serial commun
ication standa
rd and the port is
active.
Off Fast blink Registering with NMS
Flash On Yellow flash indicates transmission activity
Table 1-5 WPAN LED Status Descriptions (continued)
Color Description
Yellow Green