User's Manual
Table Of Contents
- Contents
- Preface
- Overview
- Installation
- Preparing for Installation
- Unpacking the Components
- Installation Guidelines
- Installing the Devices
- Connecting the Protective Ground and Power
- Wiring the Alarm Circuits
- Connecting to Device Ports
Ta b le 1-12 Power LED Status Description
Color Description
Off Power is not present on the circuit, or the system is not powered up.
Yellow Power is present on the external circuit, p
ower is ab
sent on an internal
circuit—system is not operating normally.
Green Power is present on external and internal circuits, system is operating
nor
mally
29/OCT/2014 REVIEW DRAFT — CISCO CONFIDENTIAL
1-16
Cisco IR500 Series WPAN Gateway and Range Extender Installation and Configuration Guide
Chapter 1 Overview
LEDs
System LED
The System LED indicates the system status. Table 1-14 lists the system LED colors and their meanings.
Ta b le 1-13 System LED Status Description
Color Description
Blinking Yellow System is booting up
Blinking Green System is active
Alarm LED
The Alarm LED indicates the alarm status. Table 1-14 lists the alarm LED colors and their meanings.
Ta b le 1-14 Alarm LED Status Description
Color Status
Blinking Red Bootload is in progress.
Off No alarm detected.
Red Alarm detected.
WPAN Range Extender LEDs
The WPAN Range Extender has one LED—a System LED.