User's Manual

29/OCT/2014 REVIEW DRAFT — CISCO CONFIDENTIAL
Contents
v
Cisco IR500 Series WPAN Gateway and Range Extender Installation and Configuration Guide
Installing the Devices 2-9
Mounting the WPAN Gateway 2-9
Mounting the WPAN Gateway on a DIN Rail 2-9
Mounting the WPAN Gateway on a Wall 2-13
Mounting the Range Extender 2-15
Mounting the Range Extender on a Pole 2-15
Connecting the Protective Ground and Power 2-18
Grounding the WPAN Gateway 2-18
Wiring the WPAN Gateway DC Power 2-20
Grounding the WPAN Range Extender 2-24
Wiring the WPAN Range Extender AC Power 2-27
Wiring the Alarm Circuits 2-29
Wiring the WPAN Gateway Alarm 2-29
Attaching the Power and Alarm Connector to the WPAN Gateway 2-31
Connecting to Device Ports 2-33
Connecting to WPAN Gateway Ports 2-33
Connecting to the RS232DCE/RS485 or RS232-DTE Ports 2-33
Connecting to the 10/100 Fast Ethernet Port 2-34
Connecting to the USB Port 2-35
Connecting to the Console Port 2-36
Connecting to WPAN Range Extender Ports 2-37
Connecting to the Console Port 2-37
CHAPTER 3 Battery Backup Unit 3-1
Battery Backup Units 3-1
WPAN Range Extender Models Supporting BBUs 3-1
Battery Backup Operations 3-2
BBU Status 3-2
Battery Backup Mode 3-2
Range Extender Configuration 3-3
Range Extender Interface Operation 3-3
BBU Firmware Upgrade 3-3
BBU Configuration during Transportation 3-4
Setting the BBU NVRAM Register T-bit 3-4
BBU NVRAM Register T-bit Settings and BBU Status 3-4
Disabling and Enabling the BBU in the Range Extender 3-4
Disabling the BBU 3-5
Enabling the BBU 3-5
Installing a BBU in the Range Extender 3-5