User's Manual

29/OCT/2014 REVIEW DRAFT — CISCO CONFIDENTIAL
5-12
Cisco IR500 Series WPAN Gateway and Range Extender Installation and Configuration Guide
Chapter 5 Operation and Configuration
Configuring the WPAN Gateway and WPAN Range Extender
CSMP Client
CSMP Client is a GUI field tool used to manage and monitor the WPAN gateway and WPAN range
extender hardware and networking information.
The “GET” function in the field tool is us
ed to obtain status and performance information about the
devices in real time. The “POST” function is used to set device parameters in real time.CSMP Client can
be used as a diagnostic tool to check a single device or the whole mesh network.
The field tool has two connection modes to connect a WPAN gateway or WPAN range extender:
• Point-to-Point Protocol (PPP) over Serial console port
• IPv6 through WPAN network
Role of CG-DM
CG-DM is a GUI field tool used to troubleshoot, configure and to update firmware images on WPAN
Gateway devices.
Configuring the WPAN Gateway and WPAN Range Extender
• Accessing the Configuration through the Console Port, page 5-12
• Uploading a Device to CG-NMS, page 5-16
• Registering with CG-NMS, page 5-17
• Configuring an IR 500 Series Device with CG-NMS, page 5-17
Accessing the Configuration through the Console Port
You can access the WPAN gateway or WPAN range extender configuration by connecting to the console
port on either device.
Warning Do not connect or disconnect cables to the ports while power is applied to the switch or any device
on the network because an electrical arc can occur. This could cause an explosion in hazardous
location installations. Be sure that power is removed from the switch and cannot be accidentally be
turned on, or verify that the area is nonhazardous before proceeding. Statement 1070
Warning If you connect or disconnect the console cable with power applied to the switch or any device on the
network, an electrical arc can occur. This could cause an explosion in hazardous location
installations. Be sure that power is removed or the area is nonhazardous before proceeding.
Statement
1080
• Connecting to the WPAN Gateway Console Port, page 5-13
• Connecting to the WPAN Range Extender Console Port, page 5-13