User's Manual

29/OCT/2014 REVIEW DRAFT — CISCO CONFIDENTIAL
5-20
Cisco IR500 Series WPAN Gateway and Range Extender Installation and Configuration Guide
Chapter 5 Operation and Configuration
CG-NMS WPAN Device Management Related Operations
• “Raw Socket Transport” chapter of Cisco 1000 Series Connected Grid Routers SCADA Software
Configuration Guide
• Configuring Raw Socket Protocol on the CGR 2010 Router
Configuring the WPAN Settings on CGR 1000 Series Routers
An SSID and PAN ID must be configured on the CGR1000 series router. For information about
configuring and SSID and PAN ID, see the Cisco Connected Grid WPAN Module for CGR 1000 Series
Installation and CG-Mesh Configuration Guide on Cisco.com.
Configuring an IPv6 DHCP Address Pool on CGR 1000 Series Routers
The IPv6 addresses of the WPAN gateway and WPAN range extender are allocated from a central
DHCPv6 server during the process of joining the mesh. The CGR1000 router only needs to be configured
as a DHCPv6 Relay.
For information about configuring the CGR 1000 series router as a D
HCP relay
, see the “Configuring
IPv6 DHCP Relay” section of the Cisco Connected Grid WPAN Module for CGR 1000 Series
Installation and CG-Mesh Configuration Guide.
Configuring MAP-T on ASR 1000 Routers
MAP-T must be configured on the ASR 1000 router.
For information about configuring MAP-T on the ASR 1000 series router, se
e the “Mapping of Address
and Port Using Translation” chapter of the IP Addressing: NAT Configuration Guide, Cisco IOS XE
Release 3S (ASR 1000).
Configuring IPv6 Routing on the CGR 1000 Series and ASR 1000 Routers
IPv6 routing needs to be configured on the CGR 1000 series and ASR 1000 routers. For information
about configuring IPv6 on the CGR 1000 series and ASR 1000 routers, see the following guides:
• “Configuring IPv6 Multicast Agent” chapter of Cisco Connected Grid WPAN Module for CGR 1000
Series Installation and CG-Mesh Configuration Guide
• “IPv6 Routing: OSPFv3” chapter of IP Routing: OSPF Configuration Guide, Cisco IOS XE Release
3S (Cisco ASR 1000)
• “IPv6 Policy-Based Routing” chapter of IP Routing: Protocol-Independent Configuration Guide,
Cisco IOS XE Release 3S (ASR 1000)
• IP Routing: BGP Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
• “IPv6 Routing: Static Routing” chapter of IP Routing: Protocol-Independent Configuration Guide,
Cisco IOS XE Release 3S (ASR 1000)
CG-NMS WPAN Device Management Related Operations
• Performing Periodic Inventory, page 5-21
• Uploading Firmware, page 5-22
• Creating Rules and Events, page 5-22