User's Manual

29/OCT/2014 REVIEW DRAFT — CISCO CONFIDENTIAL
B-4
Cisco IR500 Series WPAN Gateway and Range Extender Installation and Configuration Guide
Appendix B Cable and Connectors
Connector Specifications
WPAN Gateway 10/100 Fast Ethernet Port
The 10/100 Fast Ethernet port uses an RJ-45 connector. Figure B-2 shows the pinouts. This port supports
Auto-MDIX (Automatic TX/RX crossover) and Auto-Polarity (Auto +/- polarity detection and
correction).
Figure B-2 WPAN Gateway 10/100 Fast Ethernet Port Pinouts
391949
2 3145678Pin Label
1
2
3
4
5
6
7
8
RD-
RD+
TD-
NC
NC
TD+
NC
NC
WPAN Range Extender Power Connector
Figure B-3 shows the WPAN range extender 3 pin power connector. The pinouts are described in
Table B-6.
Figure B-3 WPAN Range Extender Power Connector
300595
Notch
Ta b l e B-6 WPAN Range Extender Power Connector Pinouts
Pin Signal Name Signal Description
1 L AC line
2 N AC neutral
3 Chassis Chassis ground