User's Manual

29/OCT/2014 REVIEW DRAFT — CISCO CONFIDENTIAL
B-5
Cisco IR500 Series WPAN Gateway and Range Extender Installation and Configuration Guide
Appendix B Cable and Connectors
Cables and Adapters
WPAN Range Extender Console Port
The console port on the WPAN range extender uses and RJ-45 connector. The console port is an RS232
serial port. Table B-7 describes the pinouts.
Ta b l e B-7 WPAN Range Extender Console Port Pinouts
Pin Signal
1 RTS
2 DTR
3 TxD
4 GND
5 GND
6 RxD
7 DSR
8 CTS
Cables and Adapters
• WPAN Gateway and WPAN Range Extender Console Port Adapter Pinouts, page B-5
WPAN Gateway and WPAN Range Extender Console Port Adapter Pinouts
The console port uses an 8-pin RJ-45 connector. If you did not order a console cable, you need to provide
an RJ-45-to-DB-9 adapter cable to connect the console port to a PC console port. You can order an
adapter (part number ACS-DSBUASYN=).
Table B-8 lists the pinouts for the console port, the RJ-45-to-DB-9 adapter cable, and the console device.
Ta b l e B-8 Console Port Signaling Using a DB-9 Adapter
Device Console
Port (DTE)
RJ-45-to-DB-9
Terminal Adapter
Console
Device
Signal DB-9 Pin Signal
RTS 8 CTS
DTR 6 DSR
TxD 2 RxD
GND 5 GND
RxD 3 TxD
DSR 4 DTR
CTS 7 RTS