User's Manual
Table Of Contents
- Contents
- Preface
- Overview
- Installation
- Preparing for Installation
- Unpacking the Components
- Installation Guidelines
- Installing the Devices
- Connecting the Protective Ground and Power
- Wiring the Alarm Circuits
- Connecting to Device Ports
29/OCT/2014 REVIEW DRAFT — CISCO CONFIDENTIAL
1-12
Cisco IR500 Series WPAN Gateway and Range Extender Installation and Configuration Guide
Chapter 1 Overview
LEDs
Figure 1-8 Top Panel of Basic and Advanced Range Extender
1
390984
1 Mounting holes
The mounting holes are for attaching the range extender to the bracket supplied for mounting the device
on a pole or w
all.
LEDs
• WPAN Gateway LEDs, page 1-12
• WPAN Range Extender LEDs, page 1-16
WPAN Gateway LEDs
You can use the LEDs to monitor the gateway status, activity, and performance. Figure 1-9 shows the
front panel LEDs.
Note Each front panel LED has an equivalent matching LED on the top panel (See Figure 1-1).