User's Manual
Table Of Contents
- Contents
- Preface
- Overview
- Installation
- Preparing for Installation
- Unpacking the Components
- Installation Guidelines
- Installing the Devices
- Connecting the Protective Ground and Power
- Wiring the Alarm Circuits
- Connecting to Device Ports
29/OCT/2014 REVIEW DRAFT — CISCO CONFIDENTIAL
1-13
Cisco IR500 Series WPAN Gateway and Range Extender Installation and Configuration Guide
Chapter 1 Overview
LEDs
Figure 1-9 WPAN Gateway Front Panel LEDS
2
3
4
5
8
9
10
1
391200
6
7
1 WPAN LED 6 USB LED
2 RSSI (Received Signal Strength Indication)
LED
7 10/100 FE LED
3 RS232-DCE LED 8 Alarm (ALM) LED
4 RS485 LED 9 System (SYS) LED
5 RS232-DTE LED 10 Power (PWR) LED
WPAN LED
The WPAN LED shows the status of the WPAN interface. Table 1-5 lists the WPAN LED colors and their
meanings.
Ta b le 1-5 WPAN LED Status Descriptions
Color Description
Yellow Green
Off Off WPAN port is disabled.
Slow blink Off Searching for network.
Fast blink Off Network Access Control (obtaining link-layer keys).
Slow blink Slow blink Joining network.
Fast blink Fast blink Configuring default route
Off Slow blink DHCPv6