Assembly Instructions

Navini Networks, Inc. Ripwave Base Station I&C Guide
Part #40-00047-00 Rev F v1.0 (TTA) 213
October 23, 2003
Figure S4: Antenna #1 On
Step 5. Start a Ping with the Modem and PC performing the test, observing the
Constellation Debugger tool. Look for the following values:
?? ACC Signal Strength
?? Absolute Sync Signal
?? Processed Sync Signal
These values, an example of which is shown in Figure S5, give you an indication if
there is something wrong with the antenna. If the values are too low or you do not see a
response from your Ping, it means that the antenna and/or the PA are not functioning
properly.