Assembly Instructions

Navini Networks, Inc. Ripwave Base Station I&C Guide

Part #40-00047-00 Rev F v1.0 (TTA) 215

October 23, 2003

Comments & Suggestions

1. Navini Smart Antenna technology uses all the 8 antenna elements for the optimum

performance of the system. It is recommended that all antennas are verified and working

properly. If one of the antennas or PAs malfunctions or it breaks, the RFS will still work.

It will not work at its optimum operation, but it will still be functioning equipment. It is

recommended that you change or swap the bad board or equipment.

2. For the testing of each antenna it is recommended that you pick only one spot to measure

the Rx side of the RFS. This spot must to be at a distance of 2-3 km with clear line-of-

sight.

3. A difference of more than 2 dB between the Absolute and Processed SYNC Signal

strength, typically indicates the presence of multipath in the environment.

Omni Procedure