Assembly Instructions

Navini Networks, Inc. Ripwave Base Station I&C Guide
Part #40-00047-00 Rev F v1.0 (TTA) 235
October 23, 2003
PVC
Field Name Values Description
if Index T1-1 The ATM IF index that this PVC is associated with.
Vpi (start and end) 0 Virtual Path Identifier. The VPI + VCI are in the cell
header and identify the next destination of a cell as it
passes through a series of ATM switches.
Vci (start and end) 0 Virtual Channel Identifier. The VPI + VCI are in the cell
header and identify the next destination of a cell as it
passes through a series of ATM switches.
Tr/Re Traffic Descr
Indexes
2 Index of the ATM Descriptor that applies to this PVC.
The Transmit and Receive Descriptors are the same.
AAL5 CPCS Tx SDU
Size (Byte)
1528 The maximum AAL5 CPCS SDU size, in bytes, that is
supported in the Transmit direction.
AAL5 CPCS Rx SDU
Size (Byte)
1528 The maximum AAL5 CPCS SDU size, in bytes, that is
supported in the Receive direction.
Admin Status Up Up or Down. The administrative (operational) state of the
PVC. If it is Down, this PVC may not be used for traffic.
AAL Type AAL5 (1-5) The type of ATM Adaptation Layer (AAL) used on this
PVC: AAL1, AAL2, AAL3, AAL4, or AAL5.
AAL5 Encap Type LLC encapsulation The type of data encapsulation used over the AAL5
SSCS layer.
Cast Type P2P The connection topology type.
Conn Kind PVC The type of VCL. This is always PVC.
Assign CPE to PVC
Field Name Values Description
PVC T1-1-1-100 (example) Identifies the PVC to be assigned to the specified CPE.
CPE 0 CPE assigned to specified PVC.
Data Denotes what type of PVC to assign.