Assembly Instructions

Ripwave Base Station I&C Guide Navini Networks, Inc.
238 Part #40-00047-00 Rev F v1.0 (TTA)
October 23, 2003
Field Name Values Description
Low Priority Min Drop
Threshold (%)
100 The minimum queue size at which low-priority packets
are considered for being dropped. For example, if set to
10%, once the queue size reaches 11% or more, low
priority packets may be dropped. The Max Threshold
Probability field determines if a packet is dropped once
the Min Threshold is exceeded.
DiffServ
Field Name Values Description
Code Point 0 Unique index (bit) to be mapped to a defined Differentiated
Service. The code point is structured as follows:
0 1 2 3 4 5 6 7
+---+---+---+---+---+---+---+---+
| DSCP | CU |
+---+---+---+---+---+---+---+---+
DSCP: Differentiated Services Code Point
CU: Currently Unused
The Type of Service (ToS) bits are included in the DSCP.
Priority Low, High, Voice Low, High, or Voice. This is the priority given to data
packets associated with this Code Point/Service. The BTS
processes data packets with Voice, then High priority before
Low priority packets.
DHCP Relay
Field Name Values Description
Relay Config Enabled (Checkbox) Enable or Disable. Clicking on the checkbox enables the
DHCP Relay feature.
Free Address Low Agent
Threshold
80
Free Address High Agent
Threshold
100
Relay Config MaxDhcp
Size
1488
Option 82 Tagging (Checkbox) Enable or Disable. Clicking on the checkbox enables the
inclusion of one or more of the following Relay
Information sub-options.
Remote Id (Checkbox) If checked (enabled), include the Modem EID as the
Remote ID Relay Information sub-option. It will be
formatted as a 6 octet string “0000<EID>”. This format
is often used in cable modem scenarios.
continued…