Assembly Instructions

Navini Networks, Inc. Ripwave Base Station I&C Guide
Part #40-00047-00 Rev F v1.0 (TTA) 239
October 23, 2003
Field Name Values Description
Circuit Id (Checkbox) If checked (enabled), include the BTS ID as the Circuit
ID Relay Information sub-option. It will be formatted as
a 4-octet string “<BTS ID>”. This format is often used
in cable modem scenarios.
VPN Id (Checkbox) If checked (enabled), include the Modem EID as the
VPN ID Relay Information sub-option. It will be
formatted as a text string “navini<EID>”. This format is
often used in DSL scenarios.
Subnet Selection/Addr (Checkbox) If checked (enabled), include the specified Subnet
Address as the Subnet Selection Relay Information sub-
option.
DOCSIS Device/Class (Checkbox) If checked (enabled), include the specified DOCSIS
Device Class as the DOCSIS Device Relay Information
sub-option.
ARP Proxy
Field Name Values Description
ARP Ingress Proxy
(Checkbox) If clicked, this enables the BTS to respond to ARP
messages coming from the CPEs/Modems to the BTS.
ARP Egress Proxy (Checkbox) If clicked, this enables the BTS to respond to ARP
messages coming from the network (backhaul) to the
BTS on behalf of the CPEs/Modems.
Layer 3 Filter
Field Name Values Description
Dynamic Acl
(Checkbox) If clicked, this enables the Dynamic Access Control List.
It provides the filtering rules for DHCP Relay - where a
BTS configured with these capabilities may add learned
addresses to the Modem’s Authenticated IP List (the
Modem’s Ingress Filter). When BTSs and Modems are
configured for this feature, any packet whose MAC
address cannot be found in the current Modem’s
Authenticated IP List will be discarded.
Egress Broadcast Filter (Checkbox) If clicked, this enables configured BTSs to drop all
Ethernet Broadcast packets.