Assembly Instructions

Navini Networks, Inc. Ripwave Base Station I&C Guide

Part #40-00047-00 Rev F v1.0 (TTA) 265

October 23, 2003

Figure Y2: Example of 120° of an Omni Site

Acceptable Criteria

In order to evaluate the test results, several criteria are reviewed. These criteria are valid for both

LOS and NLOS measurements.

?? Processed Sync Signal Strength: For a given test location, ± 2 dB variation during FTP

?? Absolute Sync Signal Strength – Processed Sync Signal Strength: not greater than 2 dB

variation during FTP

?? SNR values consistent during the FTP for all carriers used:

a. QPSK: at least 11 dB

b. 8 PSK: at least 14 dB

c. QAM16: at least 17 dB

?? UL and DL Packet Error Rates (PER) not greater than 1%. This will vary according to

interference levels, but may not render the system inoperable.

?? Uplink Beamforming Gain: between 16 dB and 21 dB. Perform a comparison of UL and DL,

Beamforming Gain differences should be not greater than 3 dB.

C D