Connection Diagram

Ripwave Base Station I&C Guide Navini Networks, Inc.
144 Part #40-00047-00 Rev F v1.0 (TTA)
October 23, 2003
Procedure
Step 1. Open the application by selecting the Data Logger icon. Figure F5 shows the icon in the
background.
Figure F5: Data Logger
Step 2. Select the desired Ethernet adapter in the pop-up window.
Step 3. Starting in the upper left corner of the program screen, set the date and time for the
application to start its measurement interval. If the date and time set are earlier than the
current time, logging will begin immediately.
Step 4. If the measurement needs to be repetitive, determine the interval between measurements
by selecting the repeat box and entering the time interval (Figure F6).
Figure F6: Measurement Interval