Connection Diagram

Navini Networks, Inc. Ripwave Base Station I&C Guide
Part #40-00047-00 Rev F v1.0 (TTA) 179
October 23, 2003
LLPL Interface Description Part
Number
Coupling
Nut
Inner
Contact
Outer
Contact
Plug NMC-PL
900 N Female Straight
Jack
EZ-900-
NFC-PL
NA Press Fit Clamp
1200 N Male Straight
Plug
EZ-1200-
NMC-PL
Hex Press Fit Clamp
1200 N Female Straight
Jack
EZ-1200-
NFC-PL
NA Press Fit Clamp
Table N3: Reference Chart Showing the Proper Tools for Use with ‘EZ’ Connectors
LMR
?
LMR
?
-FR
LMR
?
-DB
LMR
?
-LLPL
‘EZ’
Connector
Type
Strip/Prep
Tool
Deburr
Tool
Crimp
Handle
Crimp
Dies
Wrenches
400 (3/8”) Crimp ST-400EZ DBT-01 HX-4
CT-
400/300
Y1719
Included
w/Handle
N/A
600 (1/2”) Crimp ST-600EZ DBT-01 Hex-4 Y1720 N/A
900-DB
(5/8”)
Clamp ST-
900/1200C
N/A N/A N/A WR-900 WR-900
1200-DB
(7/8”)
Clamp ST-
900/1200C
N/A N/A N/A WR-1200A WR-
1200B
1700-DB
(1-1/4”)
Clamp ST-1700C N/A N/A N/A WR-1700 WR-1700
All outdoor installations should be weatherproofed with either a standard weatherproofing kit such
as the Times WK-2 kit or a cold shrink kit, also available from Times. Times LMR
?
coax cables are
low loss, flexible and non-kinking, unlike corrugated coax cables, which are much less flexible and
prone to kinking. Times Microwave Systems offers a complete range of LMR
?
cables to suit every
possible type of installation and need:
?? LMR
?
– Low loss coax, flexible and non-kinking; suitable for general outdoor use such as
jumpers, rooftops and short tower runs.
?? LMR
?
DB – Watertight outdoor cable; designed for tower feeder runs, jumpers and rooftops
applications; uses the same connectors as LMR
?
cable.
?? LMR
?
FR – Riser rated (UL/CSA listed); fire retardant; employs a low smoke non-halogen
polyolefin jacket; for use in vertical riser/access shafts – unoccupied building spaces or anywhere
that fire retardance is needed; uses the same connectors as LMR
?
cable.
?? LMR
?
– LLPL – Plenum rated (UL/CSA listed); for in-building runs; can be used in open air
handling spaces such as above drop ceilings and air plenums; flame retardant and low smoke
generating design; uses special ‘EZ’ connectors.