Installation Instructions Chapter 2a

Ripwave Base Station I&C Guide Navini Networks, Inc.
Chapter 2a
46 Part #40-00047-02 Rev E v1.0 (TTA)
October 23, 2003
Figure 11: Surge Protectors
From left to right: PolyPhaser surge protectors are used with the Combo Chassis and Split
Chassis configurations (PSX-ME for the Cal and RF cables, at the antenna, PSX for the Cal and
RF cables at the ground Buss Bar, and DGXZ+06NFNF-A for the GPS antenna cable at the
ground Buss Bar. Huber+Suhner surge protectors are used with TTA configurations
(3406.17.0012 PSX for the Cal and GPS cables, and for the Ancillary Surge protection at the
RFS; 3406.17.0009 for the Ancillary Surge protection at the ground Buss Bar). It is
recommended the use of UL listed surge protectors.
Figure 12: Surge Protectors in Buss Bar
PSX-ME PSX DGXZ+06NFNF-A
3406.17.0012 3406.17.0009
PSX-MEPSX-ME PSXPSX DGXZ+06NFNF-A
3406.17.00123406.17.0012 3406.17.00093406.17.0009