Installation Instructions Chapter 3

ManualsBrandsCisco Systems ManualsElectronicsISM band BTS with 17 dBi Panel Antenna

Ripwave Base Station I&C Guide Navini Networks, Inc.

Chapter 3

92 Part #40-00047-07 Rev F v1.0 (TTA)

October 9, 2003

KERNEL : 5.4(WIND version 2.5)

BSP : 1.0/01.19.00.00

CPU: CC (PPC860P). Processor #0.

Memory Size: 0x3f80000.

WDB: Ready.

Last reset caused by a power on condition.

Current time is FRI JUL 12 14:48:29 2002

bts-4 [Active]%

Exhibit 8: Standard ATM Boot Sequence - Example

System Boot

Copyright 2000-2001 Navini Networks, Inc.

Copyright 1984-1998 Wind River Systems, Inc.

CPU: CC (PPC860P)

Kernel Version: 5.4

BSP version: 1.0/110501

Creation date: Nov 5 2001, 13:09:12

Attaching to TFFS... done.

Loading /tffs0/LOADS/BTSB/core...5249740

Starting at 0x10000...

Auto-booting..............................Done

Starting File System......................Done

Mounting Drive /tffs0.....................Done

Mounting Drive /dev0......................Done

Mounting Drive /dev1......................Done

Starting TCP/IP Stack.....................Done

Starting ARP..............................Done

Starting motfec I/f.......................Done

Starting wec I/f..........................Done

Attaching wec(0) I/f......................Done

Attaching sl(0) I/f.......................Done

Attaching motfec(0) I/f...................Done

Attaching lo(0) I/f.......................Done

Mounting Remote Filesystem................Done

Starting Telnet Daemon....................Done

Starting Load Monitoring Tools............Done

Loading Target Shell Symbols..............Done

Starting WDB Tools........................Done

Starting Target Shell.....................Done

Initializing System Logger................Done

Starting Application......................Done

Starting LLC I/f..........................Done

Starting LLC Proxy........................Done

Starting Lpbk Proxy.......................Done

Starting CDI..............................Done

Include CME Starting T1 I/f...............Done

Starting CAM I/f..........................Done

Starting MME..............................Done

Starting EtherBridge......................Done

Starting DHCP Relay Agent.................Done

Starting Peer ARP Proxy Agent.............Done

Starting Host ARP Proxy Agent.............Done

Starting Mobile IP Proxy Agent............Done

Starting PCI Bridge.......................Done

Starting Network Processor................Done

Starting LLC Proxy........................Done

Loading LLC...............................Done

Selecting Config Data Source as EMS ......Done

Initializing NvRam Mib ...................Done

Booting Network Processor ................Done

Configuring T1(s).........................Done

Configuring ATM Interface.................Done