Installation Instructions Chapter 3

Ripwave Base Station I&C Guide Navini Networks, Inc.
Chapter 3
102 Part #40-00047-07 Rev F v1.0 (TTA)
October 9, 2003
Figure 54: Full Calibration Window
Step 9. Click Show Configuration and select the Antenna Table tab (Figure 55). Check the Tx
Gain and Rx Gain columns (the last two columns in the table) for transmit and receive
results. The transmit and receive results for all the eight antennas must be between 1
and 254. The eight values in each column should be relatively close to each other. A
value of zero indicates a problem with the associated antenna path.
Figure 55: Show Configuration/Antenna Table