User's Guide

Ripwave Unit Installation and User Guide Navini Networks, Inc.
You must have the Ripwave CPE model with the appropriate connection for your PC port –
either a USB or an Ethernet connection. At first glance, the models appear the same, but the
ports and cables for the connections are different.
· A USB connection will function only with
Windows
®
98, Windows
®
98SE, Windows
®
2000,
Windows
®
ME, or Windows
®
XP. It will not
work with Windows
®
95 or Windows NT
®
.
USB Connection
· An Ethernet connection will function with any
Win32 Operating System (Windows
®
95 or later).
Ethernet Connection
Minimum System Requirements
Operating System
Windows® 95 or later – Internet Explorer
3.0 or higher is required for installation on
Windows 95 operating systems. Macintosh
systems are not supported.
CPU Pentium level or higher
RAM 32MB or the Operating System minimum
(whichever is greater)
Hard Drive 10MB free disk space
Monitor Colors and Resolution 256 colors, 800 x 600 resolution
The Ripwave CPE Installation section includes instructions for both USB and Ethernet
connections. Be sure to use the instructions that apply to your Ripwave model. The Ripwave
Monitor Software Installation procedure is the same for either of the Ripwave models.
This manual will guide you through the simple process of installing the Navini Networks
Ripwave CPE and software, which has been developed to optimize the ease and convenience
for you, our valued customer.
Equipment Inventory
Verify the contents of your package. The contents should consist of the following items:
Ø Navini Networks Ripwave CPE
Ø Ripwave CPE AC power adapter
Ø PC-to-Ripwave CPE cable (USB or Ethernet)
Ø Ripwave User Guide
Ø Ripwave Quick Installation Guide
Ø Navini Networks Ripwave Installation CD
If you do not find all of these items in your package, notify the supplier from whom you
obtained your package.
0-00098-00 Rev A v1.0
2