User's Guide

Ripwave Unit Installation and User Guide Navini Networks, Inc.
Ripwave CPE Installation
USB Connections
The following instructions are for the installation of the Ripwave CPE using a USB
connection. Please read all instructions before attempting installation. It is recommended that
the computer and the Ripwave CPE be turned off before performing the installation.
1. Connect the USB cable
to the USB port on the
computer as shown.
2. Connect the other end of the
USB cable to the
Ripwave CPE as shown.
USB Port
3. Connect the AC power adapter
cable to the Ripwave CPE.
Plug the other end of the AC
power adapter cable
into a 110 VAC outlet.
AC Power
adapter cable
j
ac
k
CAUTION: Only use the
AC power adapter supplied
with the Ripwave CPE. Using
any other adapter may cause
damage to the Ripwave CPE.
0-00098-00 Rev A v1.0
4