User's Guide

Ripwave CPE Installation and User Guide Navini Networks, Inc.
Safety
To optimize safety when using the Navini equipment, please read before using.
When using the Navini electronic equipment, always follow the basic safety precautions to
reduce the risk of electrical shock, fire, and injury to people and/or property.
Follow all warnings and instructions that come with the equipment.
1. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of
the equipment to water could cause severe electrical shock or serious damage to the
equipment.
2. Do not immerse the equipment in any type of liquid. Use a damp cloth and if needed,
water and a mild detergent to clean the plastic shell. Unplug the equipment from the
power source before cleaning.
3. Follow all airport and FAA regulations when using the equipment on or near aircraft.
4. Only operate the equipment from the type of power source(s) indicated in this manual
(110 VAC adapter or Navini supplied battery). Any other type of input power source may
cause damage to the equipment.
5. Power the equipment using only the battery or the AC adapter cable provided, and in
accordance with the instructions specified in the user manual.
6. Do not use a frayed or damaged power cord. Do not place the power cord where it can be
stepped on or tripped over.
7. Do not touch wires where the insulation is frayed or worn unless the equipment has been
disconnected from its power source.
8. Do not overload wall outlets, power strips, or extension cords. This can cause serious
electrical shock or fire.
9. Do not place the equipment on an unstable surface. It can fall and cause injury or damage
to the equipment.
0-00098-00 Rev A v1.0
v