User's Manual

13
Cisco Systems, Inc. www.cisco.com
Installing the Cisco LoRaWAN Interface
Module
This chapter describes how to install the Cisco LoRaWAN Interface Module and contains the following sections:
 Unpacking the Device, page 13
 Tools and Hardware, page 14
 Warnings, page 15
 Safety Information, page 16
 Installation Guidelines, page 17
 Mounting the Device, page 18
 Installing Antennas, page 22
 Grounding the Device, page 28
 Powering the Cisco LoRaWAN Interface Module, page 29
Caution: The Cisco LoRaWAN Interface Module must be installed by professional networking or computer technicians.
Note: For configuration information, refer to the Configuring Virtual-LPWA section of the Cisco IR800 Integrated Services
Router Software Configuration Guide on Cisco.com:
http://www.cisco.com/c/en/us/support/routers/interface-module-lorawan/products-installation-and-configurati
on-guides-list.html
Unpacking the Device
Follow these steps to unpack the box:
1. Open the shipping container and carefully remove the contents.
2. Return all packing materials to the shipping container and save it.
3. Ensure that all items listed in the Package Contents are included in the shipment. Check each item for damage. If
any item is damaged or missing, notify your authorized Cisco sales representative.
Package Contents
Each Cisco LoRaWAN Interface Module package contains the following items:
 One Cisco LoRaWAN Interface Module (IXM-LPWA-800-16-K9 or IXM-LPWA-900-16-K9)
 Getting Started and Product Document of Compliance for the Cisco LoRaWAN Interface Module (Part Number
78-100921-01)