User's Manual

10
Getting Started and Product Document of Compliance for the Cisco LoRaWAN Interface Module
Pole/Wall Mounting
Warning: Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning: Installation of the equipment must comply with local and national electric codes. Statement 1074
When mounting a Cisco LoRaWAN Interface Module on a horizontal or vertical surface, you must ensure that the device
is oriented with the LED indicators pointing down (see Figure 4 on page 10). This positioning allows LEDs to be visible
to someone on the ground below the device.
You must also ensure the Cisco LoRaWAN Interface Module is mounted in such a way as to ensure that all antenna ports
and the console port are accessible for future use.
Figure 4 LEDs Shown on the Bottom of the Cisco LoRaWAN Interface Module
1 Pressure vent 3 PoE-in port
2 DC power port 4 LED indicators