Network Device Installation Guide

Send documentation comments to [e-mail].
Index
IN-5
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
switching modules (table) 1-37, 1-40
M
maintaining
CSM 2-50
CSM disk drives 2-51
fiber optic cables B-16
SFP transceivers B-16
maintenance records F-1
MDS 9506 Director
description 1-7
grounding location (figure) 2-27
heat dissipation D-16
installing clock modules (procedure) 2-86
installing in a rack(procedure) 2-15
power supply LEDs (table) 1-8, 1-15
removing clock modules (procedure) 2-83
MDS 9509 Director
description 1-6
figure 1-6
grounding location (figure) 2-26
heat dissipation D-7, D-11
installing clock modules (procedure) 2-79, 2-83
installing in a rack (procedure) 2-11
power supply LEDs (table) 1-8, 1-15
removing clock modules (procedure) 2-77, 2-80
MDS 9513 Director
installing in a rack (procedure) 2-7
MGMT 10/100/1000 Ethernet port
cabling E-4
pinouts E-4
MGMT 10/100/1000 port
connecting B-6
MGMT 10/100 Ethernet port
cabling E-6
connecting B-7
pinouts E-6
Migration Procedures
Generation 3 modules A-3
Installing MDS 9513 Fabric 2 Modules and Installing
MDS 9000 24-port or 48-port 8-Gbps Modules
A-9
Installing MDS 9513 Fabric 2 Modules and Running
Cisco SAN-OS 3.x
A-5
Installing the MDS 9000 4/44-Port 8-Gbps
Host-Optimized Module
A-3
Installing the MDS 9513 Fabric 2 Modules and
Activating Higher Bandwidth by Reloading the
Switch
A-10
Migration Procedure for the MDS 9509 Director and
MDS 9506 Director
A-12
modules
chassis compatibility 1-27
specifications D-4
weight D-5
MPS-14/2
description
LEDs (table) 1-43, 1-45
software release requirements 1-44, 1-48
N
NEBS 2-19
network connections, preparing B-2
new and changed information (table) 1-ix
O
open racks, standard (requirements) C-5
organization
description 1-xv
P
PEMs
installing 2-64
removing 2-64
physical specifications (table) D-2
pinouts