User Manual

Ripwave 2.6 GHz User Guide Navini Networks, Inc.
Introduction
Congratulations for being selected to test the Navini Networks Ripwave product. This
manual will guide you through the simple process of installing the Navini Networks
Ripwave unit and software, which has been developed to optimize the ease and
convenience for you, our valued customer.
The Ripwave Unit Installation includes instructions for both USB and Ethernet
connections. Be sure to use the instructions that apply to your Ripwave model.
Note: You must have the Ripwave Unit model that is appropriate for your PC port:
Model 2600U for a USB connection; Model 2600E for an Ethernet connection. At
first glance, the models appear the same, but the ports and cables for the connections
are different.
A USB connection will function only with
Windows
®
98, Windows
®
98SE, Windows
®
2000,
or Windows
®
ME. It will not work with
Windows
®
95 or Windows NT
®
.
·
·
USB
Model 2600U
An Ethernet connection will function with any
Win32 Operating System (Windows
®
95 or later).
Ethernet
Model 2600E
The Software Installation procedure is the same for either of the Ripwave models.
Minimum requirements:
Operating System: Windows
®
95 or later – Windows XP and
Macintosh systems are not supported.
CPU: Pentium level or higher
RAM: 32MB or the Operating System minimum
(whichever is greater)
Hard Drive: 10MB free disk space
Before you start!
Verify the contents of your package. The contents should consist of the following items:
Ø Navini Networks Ripwave unit
Ø Ripwave unit AC power adapter
Ø PC-to-Ripwave unit cable (USB or Ethernet)
Ø Ripwave User Guide
Ø Ripwave Quick Installation Guide
Ø Navini Networks Ripwave Installation CD
If you do not find all of these items in your package, notify the supplier from whom you
obtained your package.
1