User Manual
Table Of Contents
- Permissions, trademarks, and distribution
- Regulatory Information
- Safety
- Introduction
- Ripwave Unit Installation
- Ripwave Monitor Software Installation
- Accessing the Internet
- Ripwave Unit Indicator Lights
- Displaying the Ripwave Monitor
- Uninstall Ripwave Software
- Installing / Charging the Battery
- Beta User Guide Frequently Asked Questions
- End User License Agreement
Ripwave 2.6 GHz User Guide Navini Networks, Inc.
3. Reinstall the battery cover on the Ripwave unit.
To charge the battery, install it in the Ripwave unit. Connect the AC adapter (see
Ripwave unit installation) to the Ripwave unit. The battery will begin charging
immediately with the on/off switch in either position. The middle indicator light on the
front of the Ripwave unit (under the antenna) will be constant yellow, indicating that the
battery is being charged.
Notes:
The battery indicator light will only be on if the on/off switch is in the on
position. When the battery is fully charged, the indicator light will go off and
charging stops.
To view the battery indicator LED, rotate the antenna clockwise. See page 2 for
details.
22