User Manual

Ripwave 2.6 GHz User Guide Navini Networks, Inc.
Safety
To optimize safety when using the Navini equipment, please read before using.
When using the Navini electronic equipment, always follow the basic safety precautions
to reduce the risk of electrical shock, fire, and injury to people and/or property.
1. Follow all warnings and instructions that come with the equipment.
2. Do not use the equipment while you are in a bathtub, shower, pool, or spa.
Exposure of the equipment to water could cause severe electrical shock (even
death) or serious damage to the equipment.
3. Do not allow any type of liquid to come in contact with the equipment. Unplug
the equipment from the power source before cleaning. Use a damp cloth for
cleaning. Do not use any soaps or liquid cleaners.
4. Follow all airport and FAA regulations when using the equipment on or near
aircraft.
5. Only operate the equipment from the type of power source(s) indicated in this
manual (110 VAC or Navini supplied battery). Any other type of input power
source may cause damage to the equipment.
6. Power the equipment using only the battery or the AC adapter cable provided, and
in accordance with the instructions specified in the user manual.
7. Do not use a frayed or damaged power cord. Do not place the power cord where it
can be stepped on or tripped over.
8. Do not touch wires where the insulation is frayed or worn unless the equipment
has been disconnected from its power source.
9. Do not overload wall outlets, power strips, or extension cords. This can cause
serious electrical shock or fire.
10. Do not place the equipment on an unstable surface. It can fall and cause injury or
damage to the equipment.
viii