User's Manual

Ripwave 2.6 GHz User Guide Navini Networks, Inc.
Introduction
Congratulations for being selected to test the Navini Networks Ripwave product. This manual
will guide you through the simple process of installing the Navini Networks Ripwave unit and
software, which has been developed to optimize the ease and convenience for you, our valued
customer.
The Ripwave Unit Installation includes instructions for both USB and Ethernet connections. Be
sure to use the instructions that apply to your Ripwave model.
Note: You must have the Ripwave Unit model that is appropriate for your PC port: Model
2600U for a USB connection; Model 2600E for an Ethernet connection. At first glance, the
models appear the same, but the ports and cables for the connections are different.
A USB connection will function only with
Windows
®
98, Windows
®
98SE, Windows
®
2000,
Windows
®
ME, or Windows
®
XP. It will not
work with Windows
®
95 or Windows NT
®
.
·
·
USB
Model 2600U
An Ethernet connection will function with any
Win32 Operating System (Windows
®
95 or later).
Ethernet
Model 2600E
The Software Installation procedure is the same for either of the Ripwave models.
Minimum requirements:
Operating System: Windows® 95 or later – Internet Explorer 3.0 or higher is
required for installation on Windows 95 operating
systems. Macintosh systems are not supported.
CPU: Pentium level or higher
RAM: 32MB or the Operating System minimum (whichever is
greater)
Hard Drive: 10MB free disk space
Monitor Colors and Resolution: 256 colors, 800 x 600 resolution
Before you start!
Verify the contents of your package. The contents should consist of the following items:
Ø Navini Networks Ripwave unit
Ø Ripwave unit AC power adapter
Ø PC-to-Ripwave unit cable (USB or Ethernet)
Ø Ripwave User Guide
Ø Ripwave Quick Installation Guide
Ø Navini Networks Ripwave Installation CD
If you do not find all of these items in your package, notify the supplier from whom you obtained
your package.
1