User manual
Table Of Contents
- Notice à l’attention des installateurs de réseaux câblés
- Mitteilung für CATV-Techniker
- Aviso a los instaladores de sistemas CATV
- IMPORTANT SAFETY INSTRUCTIONS
- Power Source Warning
- Ground the Product
- Protect the Product from Lightning
- Verify the Power Source from the On/Off Power Light
- Eliminate AC Mains Overloads
- Handling Disposable Batteries
- Provide Ventilation and Select a Location
- Protect from Exposure to Moisture and Foreign Objects
- Service Warnings
- Check Product Safety
- Protect the Product When Moving It
- Telephone Equipment Notice
- United States FCC Compliance
- CE Compliance
- About This Guide
- Introducing the DOCSIS Cable Modem
- Installing the DOCSIS Cable Modem
- Installation Preparations
- Install the Cable Modem
- Operation of Front Panel Indicators
- Maintaining the Battery
- Troubleshooting the DOCSIS Cable Modem
- Frequently Asked Questions
- How Do I Configure TCP/IP Protocol?
- How Do I Renew the IP Address on My PC?
- What if I Don't Subscribe to Cable TV?
- How Do I Arrange for Installation?
- How Does the Cable Modem Connect to My Computer?
- After My Cable Modem Is Connected, How Do I Access the Internet?
- Can I Watch TV and Surf the Internet at the Same Time?
- Can I Use my Existing Phone Number with the Cable Modem?
- How Many Telephones Can I Connect?
- Common Troubleshooting Issues
- Tips for Improved Performance
- Frequently Asked Questions
- Customer Information
- Index
Frequently Asked Questions
4027620 Rev A 35
11 Click Options in the TCP/IP window, and then click Active in the TCP/IP
Options window.
Note: In some cases, the Load only when needed option does not appear. If it
appears, select the option. A check mark appears in the option.
12 Verify that the Use 802.3 option located in the upper-right corner of the TCP/IP
window is not selected. If there is a check mark in the option, select the option to
clear the check mark, and then click Info in the lower-left corner.
13 Is there a Hardware Address listed in this window?
If yes, click OK. To close the TCP/IP Control Panel window, click File, and
then scroll down to click Close.
If no, repeat these instructions from step 6.
14 Reboot your computer.
What if I Don't Subscribe to Cable TV?
If cable TV is available in your area, data service may be made available with or
without subscribing to cable TV service. Contact your local service provider for
complete information on cable services, including high-speed Internet access.
How Do I Arrange for Installation?
Call your service provider to inquire about professional installation. A professional
installation ensures proper cable connection to the cable modem and to your PC, and
it ensures the proper configuration of all hardware and software settings. Contact
your service provider for more information about installation.
How Does the Cable Modem Connect to My Computer?
The cable modem connects to the Ethernet port on your PC. For best performance,
your PC should be equipped with a Gigabit Ethernet port.
After My Cable Modem Is Connected, How Do I Access the Internet?
Your local service provider becomes your Internet Service Provider (ISP). They offer
a wide range of services including e-mail, chat, news, and information services. Your
service provider will provide the software you will need.
Can I Watch TV and Surf the Internet at the Same Time?
Absolutely! If you subscribe to cable television service, you can watch TV and use
your cable modem at the same time by connecting your TV and your cable modem
to the cable network using an optional cable signal splitter.