User Manual

HLD-H/W WIBS
22
Cisco Systems, Inc. Confidential
-> 3.RFC Gain Change
; The output power of transmitted RF signal can be controlled.
RFCX Gain (0 - 127) : ( ex : 52 )
[RFCX] TxAtt: 5.2dB
; The RF power is attenuated. Normally 15dB is setup as attenuation.
*********** SCP Menu ***********
0.Go SCP Menu
1.Pilot Sync Gain Change
2.Paging Gain Change
3.RFC Gain Change
4.Change Channel
-> 4.Change Channel
: A Channel number to assign frequency in use can be specified by typing in,
for example, 25, 300, 377
Enter choice(q to quit): 5
; For debugging purpose, we may use this menu to print out the status of system on the monitor
screen.
*********** SCP Menu ***********
0.Go SCP Menu
1.Configuration Display
2.Call Display
3.Handoff Display
4.Registration Display
5.Status Display
6.Error Display
-> 1. Configuration Display