User manual

Cabling and Configuring the 25 Mbps Port Adaptor Modules 9-7
Configuring the Interfaces
Default ATM Interface Configuration Without Autoconfiguration
If ILMI is disabled or if the connecting end node is not supporting ILMI, the following
defaults are assigned to all twelve 25-Mbps interfaces:
• ATM interface type = UNI
• UNI version = 3.0
• Maximum VPI bits = 2 (least significant 2 bits in the VPI field)
• Maximum VCI bits = 14 (least significant 14 bits in the VCI field)
• ATM interface side = network
• ATM UNI type = private
This concludes the explanation of the 12-port 25-Mbps port adapter module cabling and
configuration.