user manual

3-100
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
DIAL-CONTROL-MIB
DIAL-CONTROL-MIB
The DIAL-CONTROL-MIB contains objects that describe peer information for demand access and
possibly other kinds of interfaces. Managing access circuits requires the following groups of
information:
• General configuration information.
• Information to describe peer configuration and peer statistics. In this respect, peer configuration
means information on how to connect to peers on outgoing calls, how to identify peers on incoming
calls, and other call related configuration information.
• Information to store active call information.
• Information to retain call history.
DIFFSERV-DSCP-TC
DIFFSERV-DSCP-TC contains the definitions of the textual conventions that should be used whenever
a Differentiated Services Code Point is used in a MIB.
DIFFSERV-MIB
The DIFFSERV-MIB defines the objects necessary to manage a device that uses the Differentiated
Services Architecture described in RFC 2475.
DS1-MIB (RFC 1406, 2495, 2495)
The DS1-MIB module contains a description of DS1, E1, DS2, and E2 interfaces objects.
Note NOTE - Release 12.2(18)SXF and earlier support RFC1406. Release 12.2(33)SRA and later support
RFC 2495DS3-MIB
MIB Constraints
Table 3-30 describes constraints on objects from DS1-MIB definition. For detailed definitions of MIB
objects, see the MIB.
Table 3-30 DS1-MIB Constraints
MIB Object Notes
dsx1ConfigTable
•
dsx1LineStatusChangeTrapEnable Read-only.
• dsx1Channelization Read-only.
• dsx1LineLength Read-only.