user manual

3-101
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
DS3-MIB (RFC 1407)
DS3-MIB (RFC 1407)
The DS3-MIB contains a description of DS3 and E3 interfaces objects.
MIB Constraints
Table 3-31 lists the constraints that the Cisco 7600 Series router places on objects in theRFC1407-MIB. For
detailed definitions of MIB objects, see the MIB. Any other object not listed in the table is implemented as
defined in the RFC 1407-MIB.
• dsx1LineType Read-only.
• dsx1LineCoding Read-only.
• dsx1SendCode Read-only.
• dsx1CircuitIdentifier Read-only.
• dsx1LoopbackConfig Read-only.
• dsx1SignalMode • Read-only.
• SPA-8XCHT1/E1 usage is always none(1).
• dsx1TransmitClockSource Read-only.
• dsx1Fdl Read-only.
• dsx1LoopbackStatus SPA-8XCHT1/E1 usage: Pay load loopbacks are
not supported (dsx1NearEndPayloadLoopback,
dsx1FarEndPayloadLoopback)
dsx1FracTable
Not implemented.
Table 3-30 DS1-MIB Constraints (continued)
MIB Object Notes
Table 3-31 DS3-MIB Constraints
MIB Object Notes
dsx3ConfigTable
•
dsx3LineType Supported values are:
• T3 supports dsx3M23(2) and dsx3CbitParity(4)
• E3 supports e3Framed(7) and e3Plcp(8)
• dsx3LineCoding Read-only. Supported values are:
• T3 supports dsx3B3ZS(2)
• E3 supports e3HDB3(3)
• dsx3SendCode Read-only. Supports only dsx3SendNoCode
• dsx3TransmitClockSource Supported values are loopTiming(1) and
localTiming(2).
• dsx3CircuitIdentifier Read-only.