user manual

3-109
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
MPLS-LDP-GENERIC-STD-MIB (RFC 3815)
MPLS-LDP-GENERIC-STD-MIB (RFC 3815)
The MPLS-LDP-GENERIC-STD-MIB (RFC 3815)- This MIB contains managed object definitions for
configuring and monitoring the Multiprotocol Label Switching (MPLS), Label Distribution Protocol
(LDP), utilizing ethernet as the Layer 2 media.
MPLS-LDP-STD-MIB (RFC 3815)
The MPLS-LDP-STD-MIB (RFC 3815) contains managed object definitions for the Multiprotocol Label
Switching, Label Distribution Protocol, (LDP) document.
MPLS-LSR-MIB
The MPLS-LSR-MIB provides configuration and remote performance monitoring information to
manage label switched paths (LSPs) through a label switching router (LSR) that is using the
Multiprotocol Label Switching (MPLS) technology. The router supports Version 5 of the
IETF MPLS-LSR-MIB. This MIB is not included in release 12.2(33)SRC. It is replaced by
MPLS-LSR-STD-MIB.
MIB Constraints
Table 3-33 lists the constraints that the Cisco 7600 Series router places on objects in the
MPLS-LSR-MIB. For detailed definitions of MIB objects, see the MIB.
Table 3-33 MPLS-LSR-MIB Constraints
MIB Object Notes
mplsInterfaceConfTable
•
mplsInterfaceConfStorageType Default read-only (5).
• mplsInterfaceAvailableBandwidth Read-only. Always 0.
• mplsInterfaceTotalBandwidth Read-only. Always 0.
• mplsInterfaceTotalBuffer Read-only. Always 0.
• mplsInterfaceAvailableBuffer Read-only. Always 0.
mplsInterfacePerfTable
•
mplsInterfaceInPackets Read-only. Always 0.
• mplsInterfaceInDiscards Read-only. Always 0.
• mplsInterfaceFailedLabelLookup Read-only. Always 0.
• mplsInterfaceOutPackets Read-only. Always 0.
• mplsInterfaceOutDiscards Read-only. Always 0.
• mplsInterfaceOutFragments Read-only. Always 0.
mplsInSegmentTable
•
mplsInSegmentAdminStatus Read-only. Always up(1).