user manual

3-115
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
MPLS-VPN-MIB
• mplsVpnVrfConfMidRouteThreshold Read-only.
• mplsVpnVrfConfHighRouteThreshold Read-only
• mplsVpnVrfConfMaxRoutes Read-only
• mplsVpnVrfConfMaxPossibleRoutes Read-only. Always 0.
• mplsVpnVrfDescription Read-only
• mplsVpnInterfaceVpnClassification Read-only
mplsVpnInterfaceConfTable
•
mplsVpnInterfaceConfStorageType Read-only. Volatile(2).
• mplsVpnInterfaceConfRowStatus Read-only.
Values: active(1), notInService(2).
• mplsVpnInterfaceLabelEdgeType Read-only. providerEdge(1).
mplsVpnVrfRouteTargetTable
•
mplsVpnVrfRouteTargetRowStatus Read-only. Values: active(1), notInService(2).
mplsVpnVrfBgpNbrAddrTable
•
mplsVpnVrfBgpNbrRowStatus Read-only. Values: active(1), notInService(2).
• mplsVpnVrfBgpNbrRole Read-only. providerEdge(1).
• mplsVpnVrfBgpNbrType Read-only.
• mplsVpnVrfBgpNbrAddr Read-only.
• mplsVpnVrfBgpNbrStorageType Read-only. Volatile(2).
mplsVpnVrfRouteTable
•
mplsVpnVrfRouteInfo Read-only. Value nullOID.
• mplsVpnVrfRouteTarget Read-only. Determines the route distinguisher for
this target.
• mplsVpnVrfRouteTargetDescr Description of the route target. This object is not
supported in this Cisco IOS release. Therefore, the
object is the same as mplsVpnVrfRouteTarget.
• mplsVpnVrfRouteDistinguisher Read-only.
• mplsVpnVrfRouteNextHopAS Read-only. Always 0.
• mplsVpnVrfRouteRowStatus Read-only. This object normally reads active (1),
but may read notInService (2), if a VRF was
recently deleted.
• mplsVpnVrfRouteStorageType Read-only. Volatile(2).
• mplsVpnVrfRouteDestAddrType Read-only.
• mplsVpnVrfRouteMaskAddrType Read-only.
• mplsVpnVrfRouteTos Read-only. Always 0.
• mplsVpnVrfRouteNextHop Read-only.
• mplsVpnVrfRouteNextHopAddrType Read-only.
Table 3-35 MPLS-VPN-MIB Constraints (continued)
MIB Object Notes