user manual

3-117

Cisco 7600 Series Router MIB Specifications Guide

OL-4077-07

Chapter 3 Cisco 7600 MIB Specifications

NOVELL-RIPSAP-MIB

The NOVELL-RIPSAP-MIB defines the management information for the RIP and SAP protocols

running in an IPX environment. It provides information in addition to that contained in the IPX MIB

itself. This MIB is identical to the RIPSAP-MIB distributed as a part of the Novell NetWare Link

Services Protocol (NLSP) Specification 1.0, Novell Part Number 100-001708-002, 2nd Edition

Feb 1994.

OLD-CISCO-APPLETALK-MIB

The OLD-CISCO-APPLETALK-MIB provides information about AppleTalk traffic on the router.

OLD-CISCO-CHASSIS-MIB

The OLD-CISCO-CHASSIS-MIB describes chassis objects in devices running an older implementation

of the Cisco IOS operating system. Those objects are now described in the ENTITY-MIB.

However, the Cisco 7600 Series router implements the OLD-CISCO-CHASSIS-MIB to support older

network management applications that do not implement the ENTITY-MIB.

The router uses this MIB for port adapters, which are not supported in the CISCO-STACK-MIB. It also

contains information about FlexWAN modules. Network management applications that do not support the

ENTITY-MIB can use the OLD-CISCO-CHASSIS-MIB to discover FlexWAN modules and port adapters.

MIB Constraints

The OLD-CISCO-CHASSIS-MIB is deprecated. Chassis objects are now described in the

ENTITY-MIB; therefore, where possible, we recommend that you use the ENTITY-MIB instead of the

OLD-CISCO-CHASSIS-MIB.

Note The OLD-CISCO-CHASSIS-MIB is supported on the Cisco 7600 Series router for LAN cards, OSM

cards, and FlexWAN/PAs. Currently, SIPs and SPAs are only supported through the ENTITY-MIB,

therefore do not use the older MIBs.

Table 3-36 lists the constraints that the router places on objects in the MIB. For detailed definitions of

MIB objects, see the MIB.

Table 3-36 OLD-CISCO-CHASSIS-MIB Constraints for FlexWAN Modules and Port Adapters

MIB Object Notes

cardTable