user manual

3-122
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
RFC1315-MIB (Frame Relay)
• Errors detected on Frame Relay interfaces
MIB Constraints
Table 3-38 lists the constraints that the Cisco 7600 Series router places on objects in the RFC1315-MIB.
For detailed definitions of MIB objects, see the MIB. These constraints apply to all frame relay
supported interfaces.
Table 3-38 RFC1315-MIB Constraints
MIB Object Notes
frDlcmiTable
•
frDlcmiState Values are:
• noLmiConfigured(1)
• ImiRev1(2)
• ansiT1-617-D(3)
• itit933A(5) (Note: Value is defined in RFC2115.)
• frDlcmiAddress Values are:
• q922November90(3)
• q922(4)
Always returns q922November90(3)
• frDlcmiAddressLen Value is two-octets(2)
• frDlcmiMaxSupportedVCs Read-only. Always returns a value of 992.
frCircuitTable
•
frCircuitCommittedBurst Normally, the QoS configuration entered through the
Modular QoS CLI (MQC) syntax does not appear in these
frCircuitTable objects.
However, when QoS is configured through the MQC and
the following conditions are met, these frCircuitTable
objects contain the QoS values as they are entered
through the MQC:
• The default class is configured on the policy-map
only.
• An output policy is attached to the Frame Relay (FR)
Permanent Virtual Circuit (PVC).
• The Cisco-class-based-QoS (CBQ) enhancement
only supports two MQC actions: police cir and
shape.
• If both police cir and shape actions exist, then the
FR traffic-shaping QoS takes precedence before
policing.
• frCircuitExcessBurst
• frCircuitThroughput
• frCircuitState