user manual

3-58
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
ATM-MIB
ATM-MIB
The ATM-MIB (RFC 1695) contains the ATM and ATM adaptation Layer 5 (AAL5) objects used to
manage logical and physical entities and the relationship between them, such as ATM interfaces, virtual
links, cross connects, and AAL5 entities and connections.
MIB Constraints
Table 3-3 lists the constraints that the Cisco 7600 Series router places on objects in the ATM-MIB. For
detailed definitions of MIB objects, see the MIB.
BGP4-MIB
The BGP4-MIB (RFC 1657) provides access to information related to the implementation of the Border
Gateway Protocol (BGP). The MIB provides:
• BGP configuration information
• Information about BGP peers and messages exchanged with them
• Information about advertised networks
Table 3-3 ATM-MIB Constraints
MIB Object Notes
atmInterfaceDs3PlcpTable
Not implemented.
atmInterfaceTCTable
Not implemented.
atmTrafficDescrParamTable
Read-only.
atmVplTable
Not implemented.
atmVclTable
•
atmVclAdminStatus Read-only.
• atmVclReceiveTrafficDescrIndex Read-only.
• atmVclTransmitTrafficDescrIndex Read-only.
• atmVccAalType Read-only.
• atmVccAal5CpcsTransmitSduSize Read-only.
• atmVccAal5CpcsReceiveSduSize Read-only.
• atmVccAal5EncapsType Read-only.
• atmVclCrossConnectIdentifier Read-only.
• atmVclRowStatus Read-only.
atmVpCrossConnectTable
Not implemented.
• atmVpCrossConnectIndexNext Not implemented.
atmVcCrossConnectTable
Not implemented.
• atmVcCrossConnectIndexNext Not implemented.
* The ifType for the ifIndex used in the ATM-MIB tables must be type atm(37).