user manual

3-59

Cisco 7600 Series Router MIB Specifications Guide

OL-4077-07

Chapter 3 Cisco 7600 MIB Specifications

BRIDGE-MIB

The BRIDGE-MIB contains objects to manage Media Access Control (MAC) bridges between Local

Area Network (LAN) segments, as defined by the IEEE 802.1D-1990 standard. This MIB is extracted

from RFC 1493 and is intended for use with network management protocols in TCP/IP based internets.

CISCO-802-TAP-MIB

The CISCO-802-TAP-MIB contains object to manage IEEE 802 intercept.

CISCO-AAA-SESSION-MIB

The CISCO-AAA-SESSION-MIB contains information about accounting sessions based on

authentication, authorization, and accounting (AAA) protocols.

CISCO-AAL5-MIB

The CISCO-AAL5-MIB contains performance statistics for ATM adaptation Layer 5 (AAL5) virtual

channel connections (VCCs). This MIB provides statistics not found in the aal5VccTable in RFC 1695

(for example, packets and octets received and transmitted on the VCC).

CISCO-ACCESS-ENVMON-MIB

The CISCO-ACCESS-ENVMON-MIB indicates the reason for a power supply failure, which is

information that is not provided in the ciscoEnvMonSupplyStatusTable in the CISCO-ENVMON-MIB.

The CISCO-ACCESS-ENVMON-MIB also defines temperature and voltage notifications to replace

those in CISCO-ENVMON-MIB.

CISCO-ALPS-MIB

The CISCO-ALPS-MIB provides Cisco airline protocol support for IBM-P1024B(ALC) and

Unisys-P1024C(UTS) protocol encapsulation over TCP/IP. The MIB contains configuration and

operational information for the protocol, which provides a tunneling mechanism to transport airline

protocol data across a Cisco router-based TCP/IP network to an X.25-attached mainframe.

CISCO-ASPP-MIB

The CISCO-ASPP-MIB provides configuration and operational information on asynchronous-polled

protocols such as the asynchronous security protocols that alarm monitoring companies use.