user manual

3-63

Cisco 7600 Series Router MIB Specifications Guide

OL-4077-07

Chapter 3 Cisco 7600 MIB Specifications

CISCO-CABLE-DIAG-MIB

The CISCO-CABLE-DIAG-MIB module defines objects for managing cable diagnostic test capabilities

supported by the Cisco devices.

Cable diagnostic tests are tests intended to exercise the functional integrity of the cable attached to a

physical interface

CISCO-CALLHOME-MIB

The CISCO-CALLHOME-MIB module provides functionality to manage Call Home feature within the

framework of Call Home architecture.

A customer might be deploying network solutions to run mission critical applications such as storage

solutions that require high availability. Such customers need runtime support for their networking

products. Cisco Call Home feature enables a system experiencing Hardware/Software problem to

automatically send relevant failure information to the Support Center. The Support Center can use this

information to provide immediate help in the form of troubleshooting or hardware replacement. This

feature also provides functionality that allow storage systems to send performance, accounting, and

system health information.

CISCO-CAR-MIB

The CISCO-CAR-MIB contains information about the Committed Access Rate (CAR) assigned to router

interfaces. The CAR is used to control the rate of traffic on an interface for packet switching purposes.

The MIB provides information about how the router is to handle traffic that conforms and exceeds the

CAR on the interface.

CISCO-CASA-FA-MIB

The CISCO-CASA-FA-MIB is used in conjunction with the CISCO-CASA-MIB to manage a

Cisco Appliance Services Architecture (CASA) forwarding agent (FA).

• cbfDefinedFileFormat Only bulkBinary and bulkASCII file formats are

supported.

Note:

The cbfDefienFileTable has objects that are required for defining a bulk file and for controlling its creation. The

cbfDefineObjectTable has information regarding the contents (SNMP data) that go into the bulk file.

When an entry in the cbfDefineFileTable and its corresponding entries in the cbfDefineObjectTable are active, then

cbfDefineFileNow can then be set to create. This causes a bulkFile to be created as defined in cbfDefineFileTable

and it will also create an entry in the cbfStatusFileTable.

Table 3-5 CISCO-BULK-FILE-MIB Constraints

MIB Object Notes