user manual

3-68

Cisco 7600 Series Router MIB Specifications Guide

OL-4077-07

Chapter 3 Cisco 7600 MIB Specifications

CISCO-ENHANCED-MEMORY-POOL-MIB

The CISCO-ENHANCED-MEMORY-POOL-MIB contains objects to monitor memory pools on all of

the physical entities on a managed system. Represents the different types of memory pools that may be

present in a managed device. Memory use information is provided to users at three different intervals of

time: 1 minute, 5 minutes, and 10 minutes. Memory pools can be categorized into two groups, predefined

pools and dynamic pools. The following pool types are currently predefined:

• 1:Processor memory

• 2:I/O memory

• 3:PCI memory

• 4:Fast memory

• 5:Multibus memory

Dynamic pools have a pool type value greater than any of the predefined types listed above. Only the

processor pool is required to be supported by all devices. Support for other pool types is dependent on

the device being managed. For detailed definitions of the CISCO-ENHANCED-MEMORY-POOL-MIB

objects, see the MIB.

MIB Constraints

Table 3-7 lists the constraints that the Cisco 7600 Series router places on objects in the

CISCO-ENHANCED-MEMORY-POOL-MIB. For detailed definitions of MIB objects, see the MIB.

MIB Usage Values for Cisco FlexWAN and FlexWAN2 Cards

There are two types of memory available on the Enhanced FlexWAN cards, processor and PCI. Only the

processorMemory(2) and ioMemory (3) pool types are supported. Table 3-8 lists the memory pool names

corresponding to each pool type:

Table 3-7 CISCO-ENHANCED-MEMORY-POOL-MIB Constraints

MIB Object Notes

ciscoMemoryPoolTable

•

cempMemPoolType Values are:

• processorMemory(2)

• ioMemory(3)

• cempMemPoolAlternate Always 0.

• cempMemPoolPlatformMemory Always 0.