user manual

3-73
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
CISCO-ENTITY-ASSET-MIB
Table 3-14 lists the alarm descriptions and severity levels for the Cisco 7600 router FlexWAN
T1/E1 IMA ports.
CISCO-ENTITY-ASSET-MIB
The CISCO-ENTITY-ASSET-MIB provides asset tracking information for the physical components in
the ENTITY-MIB (RFC2737) entPhysicalTable.
The ceAssetTable contains an entry (ceAssetEntry) for each physical component on the router. Each
entry provides information about the component, such as its orderable part number, serial number,
hardware revision, manufacturing assembly number, and manufacturing revision.
Most physical components are programmed with a standard Cisco generic ID PROM value that specifies
asset information for the component. If possible, the MIB accesses the component’s ID PROM
information.
MIB Constraints
Table 3-15 lists the constraints that the Cisco 7600 Series router places on objects in the
CISCO-ENTITY-ASSET-MIB.
Table 3-15 CISCO-ENTITY-ASSET-MIB Object Constraints
Table 3-14 Alarms Supported for Cisco 7600 Router FlexWAN T1/E1 IMA Ports
Physical Entity ceAlarmDescrVendorType
ceAlarmDescr
Severity ceAlarmDescrText
FlexWAN T1/E1
IMA ports
cevPortT1ImaLink
cevPortE1ImaLink
minor Transmitter is sending remote
alarm
minor Transmitter is sending AIS
minor Receiver has loss of signal
minor Receiver is receiving AIS
minor Receiver has loss of frame
minor Receiver has remote alarm
minor Other failure
minor Physical port link down
info Physical port administrative
state down
MIB Object Notes
ceAssetTable
ceAssetOrderablePartNumber Not implemented
ceAssetSerialNumber Not implemented
ceAssetHardwareRevision Not implemented
ceAssetFirmwareRevision Not implemented
ceAssetsSoftwareRevision Not implemented