user manual

3-74
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
CISCO-ENTITY-EXT-MIB
CISCO-ENTITY-EXT-MIB
The CISCO-ENTITY-EXT-MIB contains extensions for the processor modules listed in the
ENTITY-MIB entPhysicalTable. A processor module is any physical entity that has a CPU, RAM, and
NVRAM, and can load a boot image and save a configuration. The extensions in this MIB provide
information such as RAM and NVRAM sizes, configuration register settings, and bootload image name
for each processor module.
CISCO-ENTITY-FRU-CONTROL-MIB
The CISCO-ENTITY-FRU-CONTROL-MIB contains objects to configure and monitor the status of
field replaceable units (FRUs) on the Cisco 7600 Series router listed in the ENTITY-MIB
entPhysicalTable. An FRU is a hardware component (such as a line card and module, fan, or power
supply) that can be replaced on site. This MIB is applicable to SIP and SPA modules for this release.
MIB Constraints
Table 3-16 lists the constraints that the router places on objects in the
CISCO-ENTITY-FRU-CONTROL-MIB.
ceAssetAlias Not implemented
ceAssetTag Not implemented
ceAssetIsFRU Not implemented
MIB Object Notes
Table 3-16 CISCO-ENTITY-FRU-CONTROL-MIB Constraints
MIB Object Notes
cefcModuleTable
•
cefcModuleAdminStatus enabled(1) for read and write.
reset(3) for write only.
• cefcModuleOperStatus unknown(1)
ok(2)
failed(7)
• cefcModuleResetReason unknown(1)
powerUp(2)
manualReset(5)
• cefcModuleLastClearConfigTime Not implemented.
• cefcModuleResetReasonDescription Not implemented.
• cefcModuleStateChangeReasonDescr Not implemented.
• cefcModuleUpTime Not implemented.
cefcModuleTable
cefcFRUPowerStatusTable