user manual

3-76
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
CISCO-ENTITY-SENSOR-MIB
Each Cisco transceiver sensor has 4 threshold values corresponding to the four alarm states listed in
Table 3-19 and Table 3-20. The entSensorValueTable is indexed by both entPhysicalIndex and
entSensorThresholdIndex. Cisco 7600 entSensorThresholdIndices range from 1 to 4. For N/A (not
applicable), a value of zero is returned.
Table 3-19 lists the default values for the Cisco GBIC transceivers in the entSensorThresholdTable.
• entSensorPrecision 1
• entSensorStatus ok(1)
• entSensorValue Reports most recent measurement seen by the sensor.
• entSensorValueTimeStamp Value indicates the age of the value reported by
entSensorValue object.
• entSensorValueUpdateRate Value indicates the rate that the agent updates
entSensorValue in seconds.
Tx Laser Current Sensor
•
entSensorType amperes(5)
• entSensorScale milli(8)
• entSensorPrecision 1
• entSensorStatus ok(1)
• entSensorValue Reports most recent measurement seen by the sensor.
• entSensorValueTimeStamp Value indicates the age of the value reported by
entSensorValue object.
• entSensorValueUpdateRate Value indicates the rate that the agent updates
entSensorValue (in seconds). For example, 60 seconds.
Transmit Power Sensor (Optical Tx)
Receive Power Sensor (Optical Rx)
•
entSensorType dBm(14)
• entSensorScale units(9)
• entSensorPrecision 1
• entSensorStatus ok(1)
• entSensorValue Reports most recent measurement seen by the sensor.
• entSensorValueTimeStamp Value indicates the age of the value reported by
entSensorValue object.
• entSensorValueUpdateRate Value indicates the rate that the agent updates
entSensorValue (in seconds). For example, 60 seconds.
Table 3-18 CISCO-ENTITY-SENSOR-MIB Usage Values in the entSensorValueTable for Cisco
Transceivers (continued)
MIB Sensor Object Notes