user manual

3-79
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
CISCO-FRAME-RELAY-MIB
Flex Links are typically configured in service provider or enterprise networks where users do not want
to run STP on the device.
CISCO-FRAME-RELAY-MIB
The CISCO-FRAME-RELAY-MIB contains Frame Relay information that is specific to Cisco products
or that is missing from RFC 1315.
MIB Constraints
Table 3-22 lists the constraints that the Cisco 7600 Series router places on objects in the
CISCO-FRAME-RELAY-MIB. Unless noted otherwise, the Cisco 7600 implementation of a MIB
follows the standard. Any objects not listed in a table are implemented as defined in the MIB.
Note Frame relay SVCs are not currently supported in Cisco 7600.
CISCO-FRAS-HOST-MIB
The CISCO-FRAS-HOST-MIB contains objects specific to upstream or host-end sessions.
Table 3-22 CISCO-FRAME-RELAY-MIB Constraints
MIB Object Notes
cfrCircuitTable
•
cfrCircuitType Supported value is pvc(1).
cfrExtCircuitTable
•
cfrExtCircuitMinThroughputOut Supported for QoS. Otherwise value is 0.
• cfrExtCircuitMinThroughputIn Supported for QoS. Otherwise value is 0.
• cfrExtCircuitShapeByteLimit Supported for QoS. Otherwise value is 0.
• cfrExtCircuithapeInterval Supported for QoS. Otherwise value is 0.
• cfrExtCircuitShapeByteIncrement Supported for QoS. Otherwise value is 0.
• cfrExtCircuitShapeActive Supported for QoS. Otherwise value is 0.
• cfrExtCircuitShapeAdapting Supported for QoS. Otherwise value is 0.
cfrMapTable
•
cfrMapType Values are:
• static(1)
• dynamic(2)
cfrSvcTable
Not implemented.